First thing is to do a hard reset on the device to do this please follow the below instructions: The device is on a holder to detached from the holder you will need to push up from the bottom of the device to unhook it. Once unhooked you will see

Some fire alarms beep because the battery is low (it is a quite different type of beep than the fire alarm warning sound).  If the battery is low, you should change the battery immediately. Only working fire alarms save lives, so be sure to change the battery regularly.

Check all cabling in connected correctly and rescan all your television channels. If the following doesn’t work, there could be a problem with either your output or cable. Please seek further advice by a professional.

Tenants If you are a tenant of the apartment you will need to contact your Real Estate Agent to assist you in any repairs or maintenance within your apartment. Owners If you are an Owner, you will need to seek your own tradesman for any repairs or maintenance to your

There are two main reasons for power going out. First, check to ensure the circuit breaker has not tripped in the main electrical switchboard, then follow the steps below: If the circuit breaker is in the “on” position, it means there could be an overload (the demand for electricity has

There are two main reasons for your car stacker to stop working: If the emergency button is pushed in your stacker will not move. Please ensure the emergency button is released. If a surrounding stacker is not in the home position this will stop your stacker from working. Please check

If your FOB (Swipe) stops working, there are two reasons why: If you hold your FOB to the scanner and it recognise the FOB but does not give you access this could indicate a coding issue. If you hold your FOB to the scanner and it does not recognise the